S R A / S F X 2 1 0 0 S E R I E S S A T E L L I T E R E C E I V E R
14
•
A computer platform (or laptop computer), with a program such as HyperTerminal
to talk to the terminal interface. If you wish to use the Web GUI, the minimum
platform would consist of a Pentium 75 MHz computer with an installed Local Area
Network (LAN) card and Microsoft
TM
Internet Explorer Version 5.0 or later. Chapter
3 provides further information on the Terminal Interface and Web GUI.
•
A spectrum analyzer. Although not essential, this piece of test equipment is highly
recommended for installing any satellite equipment.
Power up procedure
It is good practice to do a quick test to ensure the satellite receiver is operational after
shipment. To do this, simply plug the supplied AC power cord into the rear panel of the unit
and into the proper voltage AC outlet. If you now turn the receiver around so that you are
facing the front panel, you should notice the STATUS LED is illuminated and after some
period of time, the R/W light starts flashing (indicating that the unit is booting). At this point,
ignore the colour of any indicators, as this is just an indication that the receiver has power
and is commencing operation.
If no indicators have illuminated, power cycle the unit once to make sure, and if there is still
a problem, please proceed to Chapter 5 (Troubleshooting).
