S R A / S F X 2 1 0 0 S E R I E S S A T E L L I T E R E C E I V E R
62
When the Static Routing submenu item is selected under Data Delivery, the Static Routing
page is displayed for all network interfaces, including the optional modem interface, if the
Modem Option is installed. A sample Static Routing page is shown in Figure 4-18.
Figure 4-18 Static Routing Page
The columns in the Static Routing page are described under the Edit Routing Table page
(Figure 4-19), with the following exceptions:
Column Description
To Edit, Go
To:
The routing table displays all static routes from all network interfaces
in the receiver, including optional interfaces such as the
modem/PPP interface. Some of the routes associated with these
interfaces are configured with other GUI edit pages besides the Edit
Table page here. This column tells you where you must edit the
configuration. In the example in Figure 4-18, the second entry in the
table is edited using the Identity Edit page (see Figure 4-4). The
words “Edit Table” appear if the route can be edited locally.
Destination
For locally configured routes, this field corresponds to the
Destination entered in the Routing Table Edit page (Figure 4-19).
For routes established elsewhere (Identity Edit page for example),
the destination is the subnet derived from the IP Address and
Netmask of the associated network interface.
