S R A / S F X 2 1 0 0 S E R I E S S A T E L L I T E R E C E I V E R
167
DVB Conditional Access
System (CAS) Option
The following Appendix describes the procedure for inserting a DVB Conditional Access
(CA) Module and Smart Card (SC) into an Sxx2100B or Sxx2100MB series receiver, and
the related Web GUI operation. You will need to be certain that your model of receiver can
accommodate the appropriate type of CA Module and/or SC, depending on the DVB CAS
being used in your network.
Pre-installation Procedure
Prior to inserting a CA Module and/or SC into the slot on the rear panel of your receiver;
please take note of the following precautions:
•
Do not bend or twist the card.
•
Keep the card out of direct sunlight or other heat sources.
•
Do not remove/insert the card repeatedly into the slot.
•
Clean the card only with a soft dry tissue. Do not use liquids or detergents to clean
the card.
•
Record the card number for future reference in case the card is damaged or lost. If
the card is damaged or lost, contact your service provider for a replacement.
•
Use caution when inserting the CA Module and/or SC. The size of the slot opening
is quite small. Ensure that the CA Module or SC has been aligned correctly with
the connector inside the receiver.
Inserting The CA Module
There is one slot on the rear panel of an Sxx2100B or MB series receiver that provides a
location to insert a DVB Common Interface compliant CA Module and Smart Card
Appendix F
