S R A / S F X 2 1 0 0 S E R I E S S A T E L L I T E R E C E I V E R
44
Edit Field
Description
Viterbi Rate
Select the
Viterbi FEC rate of the carrier, using one of the options:
Auto, 1/2, 2/3, 3/4, 5/6, 7/8, 8/9 (if 8PSK/16QAM option is used).
The following Viterbi FEC/Modulation Type combinations are
possible (in accordance with DVB specifications):
1. Auto Detect (all Modulation Types)
2. 1/2 (QPSK, BPSK only)
3. 2/3 (QPSK, BPSK, 8PSK only)
4. 3/4 (QPSK, BPSK, 16QAM only)
5. 5/6 (QPSK, BPSK, 8PSK only)
6. 7/8 (QPSK, BPSK, 16QAM only)
7. 8/9 (8PSK only)
NCC PID
Is the PID number of the NCC PID (in hex), in the numeric range
0x20 to 0x1FFE. Specifying 0 disables the NCC PID.
Modulation Type
Select the modulation type, using one of the options: QPSK; or
BPSK, or 8PSK and 16QAM if your model is equipped with this
option.
Enable 22kHz
Tone
Enables or disables the 22 kHz tone to the LNB. The 22 kHz
tone is used to select the L-Band frequency band for output by
the LNB, where Disabled (off) selects 950 to 1950 MHz, and
Enabled (on) selects 1100 MHz to 2150 MHz.
Polarization
Is the polarization of the LNB, and sets the output DC voltage
from the receiver to the LNB, using one of the options:
h
for
horizontal (18VDC standard or 15 VDC optional) and
v
for
vertical (13VDC standard or 11 VDC optional).
NOTE:
The Polarization
only selects the
LNB output
voltage. To turn
the LNB power on
or off, you must
use the Supply
Select item, under
the LNB Attributes
submenu.
