S R A / S F X 2 1 0 0 S E R I E S S A T E L L I T E R E C E I V E R
153
Important EMI & Safety
Certification Information
Read these safety and operating instructions before operating your SRA/SFX series
satellite receiver. Follow instructions and heed all warnings on your unit and in this manual.
Receiver Installation
•
Operate from a power source indicated on your receiver or in this manual.
•
The AC inlet is the main power disconnect. The socket outlet shall be near the
equipment and shall be easily accessible. The power requirements for this
equipment are quite flexible with an acceptable power range of 100 to 240 VAC at
50 or 60 Hz. The fuse is part of the power supply. Replacement can only be
accomplished by a qualified technician.
•
Protect and route power cords so they will not be stepped on or pinched by
anything placed on or against them. Be especially careful at plug-ins, convenience
receptacles or cord exit points from the equipment. Frayed power cords or
damaged plugs are hazardous. Have them replaced by a qualified service
technician. Overloaded wall outlets and extension cords may cause fire or
electrical shock.
•
Always ensure there is adequate ventilation when installing the equipment. Do not
cover or block ventilation holes. Doing so may damage the unit or cause a fire.
Appendix C
CAUTION:
Earth connection
is essential before
connecting supply.
Connect your
system to a
grounded AC
outlet only.
