S R A / S F X 2 1 0 0 S E R I E S S A T E L L I T E R E C E I V E R
42
DVB Carrier
When the DVB Carrier Menu Tool Bar item is selected, a submenu page appears which
provides menu items relating to the setup and maintenance of the incoming satellite feed
(RF carriers and LNB). These are described in the following sections.
DVB Carrier Definitions
This submenu allows you to set the parameters for the 2 DVB Carriers, which can be
received by the RF front end. The DVB Carrier Status page similar to Figure 4-5 will be
displayed when the DVB Carrier Definitions submenu item is selected. The meaning of
each carrier parameter is explained under the Carrier Edit page. In this example, the
receiver is locked to the 8.57 Ms/s QPSK Carrier A at 1350 MHz.
Figure 4-5 DVB Carrier Status Page
Aside from the Common Menu Items, the following menu items are available:
Menu Item
Description
Carrier Status
Selecting this button will always return you back to the DVB
Carrier Status page, as shown in Figure 4-5. The current status
of both carrier A and B will always be displayed. The carrier that
the receiver is locked to will have its title displayed in green
letters and a message below the title will appear (see example
in Figure 4-4).
Edit Carrier <X>
Selecting this button will enter the Carrier Edit page for the DVB
Carrier selected, as shown in Figure 4-6.
Copy Carrier <X> These buttons allow you to copy the entire configuration of
NOTE:
The carrier lock
status is not
automatically
updated on the
status page. You
must use the
refresh button on
your browser to
update the lock
status
.
