S R A / S F X 2 1 0 0 S E R I E S S A T E L L I T E R E C E I V E R
12
Connector Description
PARALLEL Port
This is a standard parallel printer type port, available for future
applications.
VIDEO SVGA Port This is a standard SVGA output, used when keyboard, monitor,
and mouse are required for some SFX applications. This port is
full AGP 4X Rev 2.0 compliant, with support for 2D/3D
resolutions up to 1920x1440.
NETx Ethernet
Ports (2)
These are bi-directional RJ-45 8-wire (female) connectors, with
10/100Base-T auto sensing Ethernet interfaces. Two indicators
are provided immediately above the RJ-45 connector:
1. Yellow (left) – indicates Link status. On indicates that
the Ethernet link has been established, either in 10
Base-T or 100 Base-TX modes.
2. Green (right) – indicates transmit or receive data
activity. Off indicates that there is no data activity and
flashing green indicates that there is activity.
The pinouts for these ports are as follows:
PIN Acronym Reference
1
T+
Transmit Data +
2 T-
Transmit
Data
-
3
R+
Receive Data +
4
Not
connected
5
Not
connected
6
R-
Receive Data -
7
Not
connected
8
Not
connected
USBx Ports (4)
These are bi-directional USB ports, available for future
applications. These ports are USB v1.1 and Intel HCI v1.1
compatible.
TV Video Output
This RCA connector provides baseband composite PAL or
NTSC video output.
L & R AUDIO
Outputs
These are two audio line outputs, as provided by the internal
AC97 2.1 compliant codec.
PCI Option Slot
One PCI option slot is provided, for PCI card options.
Conditional
Access: CAM or
SmartCard
Conditional Access support is provided as follows:
SRA/SFX2100B – support for one (1) DVB Conditional Access
(CA) module with smart card that is compliant with the Common
Interface (CI) standard and the DVB scrambling system at the
head-end (e.g. Nagra Vision or Irdeto M-Crypt systems)
SRA/SFX2100R – support for one (1) smart card that is
compliant with the software based decryption system and the
