S R A / S F X 2 1 0 0 S E R I E S S A T E L L I T E R E C E I V E R
23
ResetFirewall
Usage:
ResetFirewall
Note that this command is available only to the
admin
user.
This command resets the Firewall table in the receiver. This command is useful if the
firewall table configuration has been entered incorrectly and there is a problem with
receiving or transmitting data from the receiver. There are no parameters with this
command. Once this command is executed, the Firewall table is cleared and you will need
to re-enter all the correct rules from the Web GUI again.
GetInfo
Usage:
GetInfo
This command displays the current identity and front panel status information for the
receiver. This command takes no parameters and the display is only provided once. The
output is formatted as follows (with appropriate values substituted):
Receiver Name: xxxxxxxxxxxxxxxxxxxx
Receiver Description: xxxxxxxxxxxxxxxxxxxxx
Satellite (sat0) MAC Address: 00:10:de:xx:xx:xx
Net1 (eth0) MAC Address: 00:xx:xx:xx:xx:xx
Net2 (eth1) MAC Address: 00:xx:xx:xx:xx:xx
Device Type: SRA2100xx or SFX2100xx
LED States:
Lock LED: OFF/RED/GREEN
Status LED: OFF/RED/GREEN/ORANGE
Control LED: OFF/GREEN
Sync LED: OFF/GREEN
Async LED: OFF/GREEN
Net LED: OFF/GREEN
Option LED: OFF/GREEN
ASI: DISABLED/ENABLED
Cyphercast: DISABLED/ENABLED
CAS: DISABLED/ENABLED
Modem/PPP: DISABLED/ENABLED
<and so on for any other options>
Firmware Version: xxx.xx
GetDebug
Usage:
GetDebug [-a]
