S R A / S F X 2 1 0 0 S E R I E S S A T E L L I T E R E C E I V E R
164
Aside from the Common Menu Items, the following menu items are available:
Menu Item
Description
Show
Selecting this button will always return you back to the
Cyphercast Configuration page, as shown in Figure E-4.
The
current configuration as entered under the configuration edit
page is always displayed here, along with the current status of
the Cyphercast Smart Card that is inserted in your receiver.
Edit
Selecting this button will enter the Cyphercast Configuration Edit
page, as shown in Figure E-5. The edit fields on this page are
explained below the page. Note the warning message on the
page - Send Update will cause the receiver to reboot, thus
interrupting data services.
Figure E-5 Cyphercast Configuration Edit Page
The following fields can be edited on the Cyphercast Configuration Edit page:
Edit Field
Description
ECM/EMM IP
Address
Enter the valid
multicast
IP address in dotted decimal notation.
This address and the UDP Port are configured for receiving the
ECM/EMM data, and must match the configuration of the
Cyphercast/M-crypt head end.
EMM UDP Port
Enter a valid UDP port number for EMM stream. The ECM port
number cannot be entered, as it is always 1 more than the EMM
port number. Again, this port number is required, and must
match the Cyphercast/M-crypt head end configuration.
NOTE:
The ECM/EMM
PID is of type Net
PID (see Chapter
4 PIDs and Ports).
Once the PID is
entered here, it will
appear on the Net
PID list
automatically. You
can also do the
reverse, by adding
the ECM/EMM PID
in the Net PID list,
in which case it
won’t appear here
and only the IP
address/port
number are
relevant.
NOTE:
Please note the
warnings that
are printed on
the Cyphercast
Configuration
Edit Page.
