International Datacasting SuperFlex SFX2100 Series, User Manual

Page: 15 / 184

S R A / S F X 2 1 0 0 S E R I E S S A T E L L I T E R E C E I V E R
9
Indicator Description
completed, then turns solid green, orange, or remains
red, depending on LNB status; and
2. during operation, power is being supplied to the LNB and
it is over current (power drawn is >350 mA, which may
possibly indicate a short circuit).
CONTROL Purpose: provides indication of the authorization for the receiver
to process control commands from the Network Control Channel
(NetManager NCC PID stream for the DVB Carrier – see Chapter
4).
Colour: off/green, where:
Off – normal operation, receiver is not authorized to process
commands from the Network Control Channel on the NCC PID
for the DVB Carrier.
Green - normal operation, receiver is authorized to process
commands from the Network Control Channel.
Flashing Off/Green – indicates that DVB packets are
being received on the NCC PID.
R/W Purpose: provides indication of read/write activity of the storage
device in the receiver (either compact flash disk or hard drive,
depending on model).
Colour: off/green, where:
Off – no storage device activity.
Flashing Off/Green – storage device read/write activity, as well as
an indication that the receiver is booting after power-up.
NETWORK Purpose: provides indication of the authorization and data activity
on the satellite network interface.
Colour: off/green/orange, where:
Solid Green – satellite network interface is authorized (enabled),
but there is no data activity.
Flashing Off/Green – satellite network interface is authorized and
there is data activity on one or more of the selected MPE PIDs
(see Chapter 4). If the DVB CAS or Cyphercast option is
installed, this also indicates that the data is being decrypted.
Flashing Off/Orange – DVB CAS or Cyphercast option is
installed, satellite network interface is authorized and there is
data activity on one or more of the selected MPE PIDs (see
Chapter 4). However, the data is not being decrypted.
Off – satellite network interface is not authorized.
SYNC Purpose: provides indication of the authorization and data activity