User’s Manual
General information
7
1-5
Manuals
1-5-1
Installation Manual
The installer should read carefully through the Installation Manual and should be
familiar with all the components and the operating procedures of the SmartLiving
system. In order to provide adequate protection, the installer must adhere to all
the manufacturer's guidelines relating to the active and passive security devices of
this system. It is the installer's responsibility to inform the system users that,
regardless of its capabilities, an intrusion alarm system is not a substitute for the
necessary precautions building occupants must take to prevent intrusion.
1-5-2
User's Manual
(this manual)
MANUAL CODE
DCMUINE0SLIVINGE
VERSION
4.00
The installer should read carefully through the User's Manual (supplied with each
control panel). Once the system has been installed, the installer must ensure that
the User's Manual is available to the users for consultation, and that they fully
understand how the system works and are aware of all the functions, settings and
procedures.
1-6
Operator Qualifications
1-6-1
Installer
The installer is the person (or group of persons) who sets up and programs the
entire security system in accordance with the purchaser's requirements and in
respect of the safety laws in force. As the only individual in contact with system
users, it is the installer's responsibility to instruct them on how to use the
security system properly.
Under normal circumstances, the installer is not allowed to arm/disarm the system
without previous authorization from the user. All the system partitions must be
disarmed before accessing the parameter programming phase.
1-6-2
User
The users are the occupants of the building where this intrusion control panel is
installed. Only authorized users can operate the system.
The most common operations can be carried out without code/key verification.
This method must be expressly requested by the main user, as it considerably
lowers the security level of the system and may cause false alarms, accidental
arm/disarm operations, etc.
1-7
Access Levels
The normative defines the following system-access levels, regardless of system-
access limitations:
•
Level 1
- access by any person (e.g. passer-by)
•
Level 2
- user access
•
Level 3
- installer or maintenance operator access (authorized by user - level 2)
•
Level 4
- manufacturer access
1-8
Conventions – Glossary
In order to help users understand the terminology utilized in this manual and
improve your knowledge of this system and its operating procedures, read
carefully through the Technical Terminology – Glossary (refer to
Appendix A,
Technical terminology and Glossary
).
The appendix contains the definitions of technical terms commonly used in the
field of security, therefore, relevant to the SmartLiving system.
Summary of Contents for SmartLiving 10100L
Page 45: ...User s Manual 45 Notes...
Page 46: ...46 User s Manual...
Page 47: ...User s Manual 47...
