INIM Electronics SmartLiving 10100L, User Manual

Page: 35 / 48

User’s Manual
Using the system 35
5-14
Listen-in
This function can be activated over-the-phone only.
The listen-in function allows you to eavesdrop on the protected premises through
the microphones of JOY/MAX keypads which have at least one partition in
common with the entered PIN.
Shortcut n.10 must be assigned (by your installer) to one of the number keys
relating to the code that generates this operation.
Over-the-phone
Type-in the PIN of a user code followed by “ # ”, then press the key (from “ 0 ” to
“ 9 ”) which the installer has programmed to activate “Listen-in” (shortcut n.10).
The control panel will open a listen-in channel between the phone and the first
JOY/MAX keypad configured in the system with at least one partition in common
with the entered PIN. To open a voice-communication channel with another JOY/
MAX keypad during the listen-in phase, press the number key which corresponds
to the address of the keypad you wish to use. Also in this case, the selected
keypad must have at least one partition in common with the entered code.
Press “ * ”, to end the listen-in phase and step back to the voice-announced
Shortcut menu.
5-15
Partition status enquiry
This function can be activated over-the-phone only.
The Partition status enquiry function allows you to listen to voice announcements
regarding of the armed/disarmed status of the partitions during telephone
communications with the control panel, or by activating the corresponding
shortcut from a JOYMAX keypad. The control panel will announce the armed/
disarmed status of the partitions the entered PIN is assigned to.
Note
If you activate this shortcut from a JOY/MAX keypad, the control panel will announce the
armed/disarmed status of the partitions the entered PIN is assigned to, regardless of the
keypad partitions.
The user code must be enabled (by the installer) to activate shortcut n.17 via
keys
, ..., or the number keys.
Over-the-phone
Type-in the PIN of a user code followed by “ # ” then press the key (from “ 0 ” to
“ 9 ”) which the installer has programmed to activate “Arming status” (shortcut
n.17). The control panel will announce (in order) the descriptions of the partitions
the entered PIN is assigned to and their current armed/disarmed status.
Press “ * ”, to step back to the main menu to listen to all the voice announcements
relating to the entered PIN.
Via Keypad
After entering a valid user-code PIN, press the key which is assigned to the
“Arming status” shortcut (shortcut n.17). The control panel will announce (in
order) the descriptions of the partitions the entered PIN is assigned to and their
current armed/disarmed status.
5-16
Commands over-the-phone
5-16-1
Panel to user calls
Your installer will instruct you as to which events generate voice calls. Event
report calls will be sent to the programmed contact numbers of your choice when
the event occurs and, in most cases, also when it ends.
During the call, the call recipient can:
•
press “ * ” to go to the next message or, if there is only one message, end the
successful call.
• Type-in a valid PIN followed by “ # ” and access the customized shortcuts
assigned to the code. The control panel will activate the voice guide which will
announce the available shortcuts and the number keys to press. The control
panel will activate the corresponding shortcut as soon as the selected number
is pressed on the telephone keypad.