background image

2

User’s Manual

Warranty

INIM Electronics s.r.l. (Seller, Our, Us, ) warrants the original purchaser that this
product shall be free from defects in materials and workmanship under normal
use for a period of 24 months. As INIM Electronics s.r.l. does not install this
product directly, and due to the possibility that it may be used with other
equipment not approved by Us; INIM Electronics s.r.l. does not warrant against
loss of quality, degradation of performance of this product or actual damage that
results from the use of products, parts or other replaceable items (such as
consumables) that are neither made nor recommended by INIM Electronics.
Seller obligation and liability under this warranty is expressly limited to repairing
or replacing, at Seller's option, any product not meeting the specifications. In no
event shall INIM Electronics s.r.l. be liable to the purchaser or any other person
for any loss or damage whether direct ot indirect or consequential or incidental,
including without limitation, any damages for lost profits, stolen goods, or claims
by any other party caused by defective products or otherwise arising from the
incorrect or otherwise improper installation or use of this product.

This warranty applies only to defects in parts and workmanship relating to normal
use. It does not cover:

damage arising from improper maintenance or negligence

damage caused by fire, flood, wind or lightning

vandalism

fair wear and tear

INIM Electronics s.r.l. shall, at its option, repair or replace any defective products.
Improper use, that is, use for purposes other than those mentioned in this
manual will void the warranty. Contact Our authorized dealer, or visit our website
for further information regarding  this warranty.

Limited 
Warranty

INIM Electronics s.r.l. shall not be liable to the purchaser or any other person for
damage arising from improper storage, handling or use of this product.

Installation of this Product must be carried out by qualified persons appointed by
INIM Electronics.  Installation of this Product must be carried out in accordance
with Our instructions in the  product manual.

Copyright

The information contained in this document is the sole property of  INIM
Electronics s.r.l. No part may be copied without written authorization from INIM
Electronics s.r.l.

All rights reserved.

European 
Directive 
compliance

Hereby INIM Electronics s.r.l. declares that the SmartLiving series of intrusion-
control panels, the Air2 series of devices and the SmartLink product are in
compliance with the essential requirements and other relevant provisions of
Directive 1999/5/CE.

Moreover, INIM Electronics s.r.l. also declares that all other devices mentioned in
this manual are in compliance with the essential requirements and other relevant
provisions of Directive 2004/108/CE.

The full declarations of conformity can be found at URL: www.inim.biz/dc.html.

State-of-the-art 
Installations 
(DM 37/08)

The devices described in this manual, in accordance with the settings selected
during the installation phase and the following illustrated guidelines are,
alternatively, in compliance with the the Italian Normative CEI 79-2:1998+Ab:2000
performance level 2 or European Normative CEI EN 50131-3:2009 (in reference to
Control and indicating equipment - intrusion control panels) and CEI EN 50131-
6:2008 (in reference to Power supplies) security grade 

3

.

In support of research, development, installation, testing, commissioning and
maintenance of intrusion alarm systems installed in buildings please refer to the
following normative documents:

CEI 79-3 e CEI CLC/TS 50131-7.

When installing INIM systems, it is up to the installer company to install systems
equipped with Normative CEI 79-2 compliant devices rather than devices
compliant with European Normatives series EN50131 within and not over the
DOWs summarized in amendment CEI 79-2;V1:2010.

Summary of Contents for SmartLiving 10100L

















































Reviews: