10
The SmartLiving System
User’s Manual
this system provides a series of shortcuts" (refer to "Shortcuts" in Appendix)
associated with keys
.
Generally, intrusion control panels do not allow access to the system via keypad
without code entry. However, by means of the customized (personal) shortcuts
associated with keys
, ...,
it is possible to enable building occupants to
access and operate the system without code entry.
The installer must program the shortcuts to suit user requirements and explain
how they are used. For example, it may be useful to allow all the building
occupants to arm the system without code entry, as this operation increases the
level of system security. However, operations which lower the level of system
security should be reserved for code users only. Under normal circumstances,
operations which increase system security can be allowed without valid-code
entry whereas, operations which lower system security (Disarm, Delete Alarm/
Tamper memory, Deactivate Alarm/Tamper outputs) should be allowed only after
valid-code entry.
Each keypad is assigned (by the installer) to the partitions it controls.
JOY/MAX keypads also provide a programmable chronothermostat function. This
function allows you to set up zone management (one zone per keypad) of the
heating/air-conditioning system.
The temperature is gauged by a built-in temperature sensor. The hysteresis is
fixed at 0.4°C.
The Concept/G keypad provides a further two options relating to direct user
access.
A special feature allows activation of the backlight of the display and keys when
users approach the keypad. This is achieved through a proximity sensor which
can be activated by pressing keys
and
simultaneously and deactivated
by pressing
and
.
The other option, block/unblock keypad, can be achieved by pressing key
for
3 seconds. If the block keypad option is enabled, the display will show the icon
opposite.
2-3-1
Display - description
The brightness and contrast of the backlit-graphic LCD (96 x 32 pixel) can be
adjusted by way of the respective options on the User Menu (refer to paragraph
5-8 Keypad settings
).
The first line of the display shows the date and time. If you are using a JOY/MAX
keypad, the date and room temperature will alternate on the screen every 3
seconds.
The left side of the second line shows the characters that indicate the current
status of the partitions the keypad is assigned to:
•
D
= partition disarmed
•
A
= partition armed in Away mode (interior and perimeter zones armed)
•
S
= partition armed in Stay mode (perimeter zones armed)
•
I
= partition armed in Instant mode (perimeter zones armed with no delay)
•
-
= partition does not belong to the keypad
The displays of the SmartLiving 505 and 515 models show 5 characters indicating
the status of partitions 1 to 5 (both models have 5 partitions).
The displays of the SmartLiving 1050 and 1050L models show 10 characters
indicating the status of partitions 1 to10 (both models have 10 partitions).
The display of the SmartLiving 10100L model, alternates at 3 second intervals,
between 10 characters indicating the status of partitions 1 to 10 and 5 characters
indicating the status of partitions 11 to 15 (the 10100L model has 15 partitions).
If a partition has memory of an alarm or tamper condition, the character that
represents the partition concerned will blink.
The right side of the second line shows several icons which provide visual
information regarding the system.
18:23 30/10/2011
DASIDASI--
Summary of Contents for SmartLiving 10100L
Page 45: ...User s Manual 45 Notes...
Page 46: ...46 User s Manual...
Page 47: ...User s Manual 47...
