INIM Electronics SmartLiving 10100L, User Manual

Page: 21 / 48

User’s Manual
Shortcuts 21
3-3-2
Shortcuts on JOY/MAX-
keypad readers
Hold a valid key in the vicinity of the reader area of the JOY/MAX keypad,
indicated by
.
The key and reader shortcuts will flash one-by-one at 3 second intervals on the
keypad display.
When the required shortcut is indicated, remove the key to activate the
corresponding action.
The shortcuts appear on the display in the following order:
1. Description of the first reader shortcut for 3 seconds
2. Description of the second reader shortcut for 3 seconds
3. Description of the third reader shortcut for 3 seconds
4. Description of the fourth reader shortcut for 3 seconds
5. Description of the fourth reader shortcut for 3 seconds
6. “Disarm ” (disarms all the partitions) for 3 seconds
7. Then back to point 1. if the key is not removed.
If, during this phase, any of the partitions are armed, the LED sequence will start
at point 6.
3-3-3
Keyfob shortcuts
To activate the shortcuts (programmed by your installer) assigned to the 4 keys
, ..., on the keyfob, simply push the button which corresponds to the
desired command. The successful outcome of the operation will be signaled by
the buzzer and feedback LEDs on the keyfob (refer to
Table 9: Feedback signals
provided by KF100 ).
3-4
Shortcut list
For the complete list of shortcuts refer to the table in Appendix B, Shortcuts at
default .
Shortcuts 0 to 8, shown in the table, carry out the specified actions instantly.
Shortcut 9 can be activated over-the-phone only (telephone shortcut).
Shortcut 17 can be activated over-the-phone or at a keypad.
All other shortcuts (from 10 to 16 and from 18 to 37) provide direct access to
specified sections in the User Menu, therefore, can be activated at keypads only.
User key
Arm/Disarm
Scenario 004
Partit. notReady
User key
Activate outputs
Cancel
User key
Arm/Disarm
Scenario 003
Partitions ready
3 seconds
3 seconds