User’s Manual
The SmartLiving System
11
Note
If duly programmed by the installer, the icon
will not be shown when Teleservice is
enabled.
The remaining section of the display (that is, the third and fourth line) is occupied
by the icons which correspond to the Shortcuts associated with keys
, ...,
. If the function keys have not been associated with shortcuts, the third and
fourth line will be empty.
2-3-2
Display - standby status
A)
If the control panel is in Maintenance status, the first line on the screen will
show the string indicated in the figure. The characters “K03” indicate the
address assigned to the keypad (in the example, the keypad is at address
3). If you are using a Joy/MAX keypad, the string will also show “P05”,
which is the address assigned to the built-in proximity reader (in the exam-
ple, the reader is at address 5).
B)
If any of the keypad partitions has Alarm or Tamper memory, the first line
of the screen will flash the descriptions of the zones concerned every 3 sec-
onds. In the event of Alarm or Tamper memory, the red LED on the key-
pad and the characters corresponding to the partitions concerned will blink.
C)
If the control panel is in Maintenance status and any of the keypad parti-
tions has memory of an Alarm or Tamper condition, the first line on the
screen will show the strings described in points A) and B).
D)
If the "View open zones of disarmed partitions" option is enabled, the first
line on the screen will flash (approximately every 3 seconds) the descrip-
tions of any zones which are not-in-standby status when the keypad parti-
tions disarm. Any auto-bypassable zones will be shown in white on black
background.
Note
Case D is discernible from case B in the fact that in case B, the red LED on the keypad
blinks.
Case D is viewable only when the conditions of cases A, B and C are not present.
Table 3:
The icons (shown on the second line of the display)
Icon
Name
Not present
On solid
Blinking or interchanging icons
Telephone line
Telephone line busy
(Icon blinking)
Telephone line down
Peripheral tamper
All peripherals are properly
placed and all enclosures
covers are closed.
At least one peripheral (keypad,
reader, expansion) is in tamper
status (enclosure open or device
dislodged).
(Interchanging icon)
All peripherals are properly placed and all
enclosure covers are closed, however,
tamper has been detected and cleared
(Tamper memory).
Peripheral Loss
All the peripherals in the
system configuration are
responding properly
(Present).
At least one peripheral (keypad,
reader, expansion) is not
responding properly.
(Interchanging icon)
All the peripherals in the system
configuration are responding properly,
however, loss of a peripheral has been
detected and cleared (Peripheral Loss
memory).
Answerphone
Answerphone function
disabled
Answerphone function enabled
Teleservice
Teleservice disabled
Teleservice enabled
Key
(Icon blinking)
False key
Control panel Tamper
The Control panel is
properly placed and the
enclosure is closed.
The Control panel is in tamper
status (enclosure open or device
dislodged).
(Interchanging icon)
The Control panel is properly placed and
the enclosure is closed, however, panel
tamper has been detected and cleared
(Panel tamper memory).
Thermostat:
Winter mode
The thermostat option is
disabled.
The keypad thermostat option is
enabled in Winter mode
(Heating).
Thermostat:
Summer mode
The keypad thermostat option is
enabled in Summer mode (Air-
conditioning).
Thermostat:
Heating/Air-
conditioning
Heating/Air-conditioning
Off.
Heating/Air-conditioning On.
MaintenanK03 P05
DASIDASI--
Panel T03
DASIDASI--
Panel T03
DASIDASI--
Summary of Contents for SmartLiving 10100L
Page 45: ...User s Manual 45 Notes...
Page 46: ...46 User s Manual...
Page 47: ...User s Manual 47...
