INIM Electronics SmartLiving 10100L, User Manual

Page: 17 / 48

User’s Manual
The SmartLiving System 17
1. Disarm the partitions common to the key and reader concerned.
2. Activate the respective Patrol Time for the partitions concerned.
3. Re-arm the partitions (as before) when the Patrol Time expires.
If the patrol key is held in the vicinity of the reader while the Patrol Time is still
running (for example, if the inspection ends ahead of time), the Patrol Time
will end immediately and the partitions will arm as before.
• Maintenance option - On acceptance of a key with this attribute, the system
will deactivate any outputs associated with Zone alarm/tamper and Partition
alarm/tamper events (on the Partitions the key and reader have in common).
This type of key can select the reader shortcuts and its customized (personal)
shortcuts.
2-6-1
Air2-KF100 Wireless keyfobs
The KF100 keyfob has 4 remote-control buttons which can each be programmed
with a shortcut (ask your installer for details). The graphic-choice feature allows
you to identify the buttons by numbers or icons.
The keyfob also provides 4 button-associated LEDs and a confirmation LED. As a
result of two-way communications with the BS100 transceiver, the KF100 keyfob
imparts audible and visual feedback signals (beep and LED signals) which notify
the user of the outcome of requested operations.
Note
If an operation is successful, but the corresponding LED fails to light, it is an indication that
the battery is low.
The battery must be replaced before it runs out completely.
2-7
Multi-system access
Users can access several systems using the same code/key/keyfob. The user
code, key or keyfob must be enrolled separately on the control panels concerned,
and can be programmed with different attributes and functions in accordance
with the requirements of each specific system.
The keys and codes provide the systems with random codes (for keys) or PINs
(for codes) which the system associates with the respective attributes and
functions programmed by the installer. For example, a user key/code may be
enabled on partitions 1 and 2 on system A, on partitions 7, 8 and 9 on system B
and on partitions 4 and 5 on system C.
This operating method is possible for all keys and codes.
Technical
specifications
Value
Battery
3V CR2032 Lithium
battery (included)
Buzzer Multitone
Rubber pushbutton
version
- with icons
- with numbers
Table 9: Feedback signals provided by KF100
Push
button
Icon LED 1 LED 2 LED 3 LED 4 Buzzer signal Operation
1 flash beep Shortcut activation 1
1 flash beep Shortcut activation 2
1 flash beep Shortcut activation 3
1 flash beep Shortcut activation 4
+
+
1 flash 1 flash beep Block/Unblock keyfob
any 4 flashes 4 flashes Keyfob blocked
Feedback from panel
Confirmation LED -
green
Confirmation LED - red Buzzer signal
Command not
received
1 flash
Operation not done 4 flashes
bop (audible
error signal)
Operation done 3 flashes long beep