INIM Electronics SmartLiving 10100L, User Manual

Page: 19 / 48

User’s Manual
Shortcuts 19
Chapter 3
SHORTCUTS
3-1
Keypad shortcuts
Each keypad can be programmed with up to 12 shortcuts associated with 4
function keys
. The shortcuts are identified by icons which
appear on the lower part of the display. Arrows to the right and left of the icons
indicate that keys and will allow you to view and use other shortcuts (if
programmed).
The 12 keypad shortcuts can be activated in 4 different ways, as follows.
1. By ALL . Press the respective key , ..., to activate the shortcut
instantly without code entry. The shortcut will affect all the keypad parti-
tions.
2. By ALL with confirmation request . Press the respective key , ...,
, the system will ask if you wish to continue or not. If you press
the shortcut will activate instantly, if you press or the operation
will be abandoned. This method protects against accidental operations. The
shortcut will affect all the keypad partitions.
3. Code users only . Press the respective key , ..., then enter a
valid code, the shortcut will activate after code recognition. The shortcut
will affect the partitions common to both the keypad and code.
4. Code users only when activation of the shortcut lowers system
security
. If a shortcut involves a scenario that completely disarms a parti-
tion, or switches a partition from Away mode to Stay mode, the security of
your system will obviously be at risk, therefore, the system will request
code entry. The shortcut will affect the partitions common to both the key-
pad and code.
To activate a shortcut, press the key , ..., which corresponds to the
shortcut icon. The system will either activate the shortcut instantly (case 1.) or
will request confirmation (case 2.) or code entry (cases 3. and 4.) before carrying
out the operation.
CONTINUE?OK=YES
18:23 30/10/2011
DASIDASI--
18:23 30/10/2011
DASIDASI--
(1.)
18:23 30/10/2011
DASIDASI--
Type in code
******
(3./4.)
Shortcut
activation
(2.)
Shortcut
activation
Shortcut activation