INIM Electronics SmartLiving 10100L, User Manual

Page: 29 / 48

User’s Manual
Using the system 29
•• System voltage
•• Zone status - allows you to view only the zones associated with the
partitions the code and keypad concerned have in common. Use keys
and to scroll the list of accessible zones.
•• Faults
•• PanelVersion
• Other shortcuts which provide direct access to sub-sections of the “View”
section are:
•• Shortcut n.28 ( ) accesses “View/Events log”
•• Shortcut n.29 ( ) accesses “View/Alarms log”
•• Shortcut n.30 ( ) accesses “View/Faults log”
•• Shortcut n.31 ( ) accesses “View/Arm/Disarm op.”
•• Shortcut n.32 ( ) accesses “View/System voltage”
•• Shortcut n.33 ( ) accesses “View/Zone status”
•• Shortcut n.36 ( ) accesses “View/Faults”
Method 2
Access the "View" section of the User menu by means of a valid PIN. Follow the
instructions described in
Method 1 .
Via Web
Access the SmartLAN/G web-server (refer to paragraph 5-17-2 Access the web-server ).
Press the button. It is possible to view only the partitions the user controls:
Press the button. Use the mouse to select a partition and view (in the top
section) all the partition zones the user controls:
The outputs the user has access to will be shown in the field in the lower part of
the zone section, after pressing the button if you are using a computer, or
after pressing if you are using a mobile telephone device:
Press the button. It will be possible to view all the timers:
Partition Operating mode Partition status Alarm memory Tamper memory Auto-armed
Description of the
selected partition
Disarmed
Away mode
Stay mode
Instant mode
Partition in
standby status
empty
No alarm events
saved to
memory
empty
No tamper
events saved to
memory
empty Disabled
Partition in
alarm status
Alarm event
saved to
memory
Tamper event
saved to
memory
Enabled
Partition in
tamper/short-
circuit status
Zone Zone status Inhibited status Test Alarm memory Tamper memory
Description of the
zones which belong
to the selected
partition
Zone in standby
status
Zone in inhibited
status
Zone in test
status
empty
No alarm events
saved to
memory
empty
No tamper
events saved to
memory
Zone in alarm
status
Zone
unbypassed
empty
Zone not in test
status
Alarm event
saved to
memory
Tamper event
saved to
memory
Zone in tamper/
short-circuit
status
Output Output status
Output
descriptions
Output activated
Output
deactivated
Timer Timer status
Timer
description
Timer active
Timer not active