30
Using the system
User’s Manual
Press the
button then the
button. It will be possible to view all
the events saved to the log:
5-6
Activating/Deactivating
outputs
This section allows you to activate/deactivate manually the outputs the code
controls.
Via Keypad
Method 1
Activate the shortcuts associated with keys ,
..., (shown on the display)
with or without code entry.
•
The shortcut assigned to “Output control” (shortcut n.21:
), allows you to
view the “Outputs ON/OFF”” section of the User Menu where you can:
1. Use keys
and
to select the output you wish to activate /deactivate.
2. Press
to activate the selected output or
to deactivate it.
•
The shortcut assigned to the “Activate outputs” operation (shortcut n.5:
) will activate the output when the respective button is pressed.
•
The shortcut assigned to the “Deactiv. outputs” (shortcut n.6:
) will
deactivate the output when the respective button is pressed.
Method 2
Access the “Outputs ON/OFF” section of the User Menu by means of a valid PIN.
Follow the instructions described in
Method 1
.
Via Reader
Hold a valid digital key in the vicinity of the reader until the reader LEDs or
display indicates "Activate outputs” (shortcut n.5) or “Deactiv. outputs” (shortcut
n.6).
Over-the-phone
Type-in the PIN of a user code followed by “
#
” then press the key (from “
0
” to
“
9
”) which the installer has programmed to trigger “Activate outputs” (shortcut
n.5) or “Deactiv. outputs” (shortcut n.6).
Via Wireless keyfob
Push the respective button on the keyfob and verify the outcome of the requested
operation, as described in paragraph
2-6-1 Air2-KF100 Wireless keyfobs
.
Via Web
Access the SmartLAN/G web-server (refer to paragraph
5-17-2 Access the web-
server
) .The outputs the user has access to will be shown in the field in the lower
part of the zone section, after pressing the
button if you are using a
computer, or after pressing
if you are using a mobile telephone device.
Select an output and activate or deactivate it using the buttons shown opposite:
Number
Date/Time
Description
Partition involved
Source
Location
Category
Progressive number
of the event
Date and time of the
event (saved to the
control panel-events
log)
Event description
The group of
partitions involved in
the event (if
applicable)
User ID or event
trigger (if applicable)
Identification and
location of the
peripheral involved
(if applicable)
Event category
18:23 30/10/2011
DDDDDDD
User Code
Activations
View
Outputs ON/OFF
Type in code
******
Method 2
Method 2
Method 2
Outputs ON/OFF
RELAY 001
OUTPUT 001
OUTPUT 002
Method 1
Output
deactivate
Output
activated
Icon
Key
Activate selected output
Deactivate selected output
Summary of Contents for SmartLiving 10100L
Page 45: ...User s Manual 45 Notes...
Page 46: ...46 User s Manual...
Page 47: ...User s Manual 47...
