Optic 6 Sport - Page 31
Sailplane Controls and Switch Assignments
To avoid duplication of text within the manual we suggest that
if you have not already read the following you refer to this
previously shown information in the front of the manual.
The following section covers the Optic Sport's GLID mode programming functions specific to sailplanes. Please refer to the Initial
Setup Menu on pages 13-15 and the ACRO Main Function Menu starting on page 17-29 to reference all other Optic Sport
programming instructions not specific to the GLID menu.
- Introducing the Optic 6 Sport
- If you are new to Computerized RC Transmitters
- Charging the Batteries
- Flying Safely
- Mode 1 Configuration
- Flying Field info
- Frequency Control
- Optic 6 Sport Programming Switches and Buttons
- Transmitter Displays and Messages
- Initial Setup Menu Programming
GLID FUNCTIONS MAP
EPA
End Point Adjust (Servo travels)
18
D/R
Dual Rates
20
EXP
Exponential Settings
21
S.TRM
Subtrim (Neutral settings)
22
S.REV
SERVO Reverse
22
P.MIX
Programmable Mixer
22
STCK
Throttle Control Location
32
V.TAL
V-tail mixing
25
A->R
Rudder Coupling & ailerons
26
E->F
Elevator Flap Mixing
26
CROW
CROW (Proportional airbrake function)
34
CAMB
Camber (Combined flaps & ailerons)
34
ADIF
Aileron Differential
33
FLT.C
Flight condition(NOR, ST1, ST2, ST3)
28
Volage/Timer Display
hormal Display Mode
End Point Adjust [EPA]
Press both Edit Buttons
Dual Rate Set [D/R]
Exponential [EXP]
Sub-Trims [S.TRM]
Servo Reversing [REV]
Prog.Mix [P.MIX]
Throttle Control Location
V-Tail [VTAL]
Ail -> Rud Mix [A-R]
Elev->Flap Mix [E-F]
CROW (Proportional Airbrake Function)
Camber [CAMB]
ADIF Aileron Differential
FLT.C Flight condition
