Optic 6 Sport - Page 29
4. To establish a second set of dual rates for the ailerons in
flight condition mode ST1, move the switch SW-3 to the back
of the case: ST1 appears. Now set a dual rate when the
switch SW-2 in the "0" position and then in the "1" position.
5. To establish a third set of dual rates for the ailerons in flight
condition mode ST2, move the switch SW-3 to the front of the
case: ST2 appears. Now set a dual rate when the switch
SW-2 in the "0" position and then in the "1" position.
6. If you wish to set dual-rate ranges for the elevator and the
rudder follow the last three steps above-entering in the values
in elevator CH 2 and then in rudder CH 4.
7. To establish the two additional flight mode exponential
settings, scroll to the EXP screen and follow essentially the
same process outlined above for setting the dual-rate ranges.
(Note that both the dual-rate and exponential settings are
toggled on the same switch: SW-2).
FLT C (Flight Conditions)
