Vortex86DX-MSJK Windows Embedded CE 6.0 R3 Jump Start Rev 2.2
Page 38 of 144
VDX-6326 SBC’s
Peripherals
Windows Embedded CE 6.0 Drivers & Support Components
IDE
ATAPI storage driver – This driver is provided by the Platform Builder, in the component
catalog.
The ATAPI driver component in the ICOP_VDX6326_60B BSP, when selected, enables
the appropriate environment variables to include the ATAPI driver and support library,
provided by Platform Builder, to the OS design project
CompactFlash*¹
The VDX-6326 SBC’s CompactFlash slot is linked to the IDE interface and can only
support CompactFlash storage.
CompactFlash I/O device is not supported.
CompactFlash flash storage is supported by the ATAPI storage driver.
The ATAPI driver component in the ICOP_VDX6326_60B BSP, when selected, enables
the appropriate environment variables to include the ATAPI driver and support library,
provided by Platform Builder, to the OS design project.
R6040 Ethernet
R6040 Ethernet driver – This is a third party driver provided as part of the
ICOP_VDX6326_60B BSP by ICOP, to support the R6040 Ethernet controller, built-in
with the Vortex86DX System-On-Chip.
Realtek-8100 Ethernet
The Realtek-8100 Ethernet is supported by the Realtek-8139 (RTL-8139) driver
provided by CE 6.0 Platform Builder.
The Realtek-8139 Ethernet driver component in the ICOP_VDX6326_60B BSP, when
selected, enables the appropriate environment variables to include the Realtek RTL-
8139 driver and support library, provided by Platform Builder, to the OS design project.
Serial Ports
Serial Port driver – This driver is provided by the Platform Builder, in the component
catalog.
The Serial Port driver components in the ICOP_VDX6326_60B BSP, when selected,
enable the appropriate environment variables to include the Com16550 serial port
driver, provided by the Platform Builder, to the OS design project, and configure the
necessary registry entries to support each of the 4 serial ports.
SPI Flash Storage
SPI Flash driver – This is a third party driver provided as part of the
ICOP_VDX6326_60B BSP by ICOP, to support the onboard 4MB SPI flash.
USB Audio
USB Audio driver – This is a third party driver provided as part of the
ICOP_VDX6326_60B BSP by ICOP, to support the USB audio controller.
Z9s Display
Z9s Display driver – This is a third party driver provided as part of the
ICOP_VDX6326_60B BSP by ICOP, to support the Z9s display controller.
USB Ports (USB 2.0 Host)
USB host drivers (Driver available from Platform Builder’s component catalog)
*¹
The CompactFlash (CF) slot on VDX-6326 SBC is link to the IDE interface, and does NOT support hot-swap. When
a CF card is plugged into the slot prior to power on, the system will detect and recognize the CF card as an IDE
storage device. When booting to CE 6.0, the CF card will shows up as “Hard Disk”.
The VDX-6326 SBC used to develop the exercise for this guide is configured to boot from a Compact
Flash module. The Compact Flash emulates as an IDE hard drive and requires the ATAPI and FAT file
system component to function.
To learn more about each of the CE 6.0 components on the catalog, refer to the CE 6.0 help
document from the development workstation, or from the following MSDN URL:
Windows Embedded CE 6.0 Documentation
http://msdn.microsoft.com/en-us/library/ee504812.aspx
