Vortex86DX-MSJK Windows Embedded CE 6.0 R3 Jump Start Rev 2.2
Page 59 of 144
Fig. 49 -
Configure TCP/IP Transport
•
From the
Configure TCP/IP Transport
screen, select the
Use specific IP address
option, and
enter the target device’s IP address from the earlier step.
•
Click on the
OK
button to close the
Configure TCP/IP Transport
screen.
•
Click on the
OK
button to close the
MyWinCE600_SDK x86 Device Properties
screen.
•
Click on the
OK
button to close the Options screen.
Establish Connectivity to CE 6.0 Target Device
To initiate connectivity to the target device, select
Tools | Connect to Device,
from the VS2005 IDE,
to bring up the Connect to Device screen, as shown in Figure 50.
Fig. 50 -
Connect to Device
•
Select
MyWinCE600_SDK
from the Platform selection.
•
Click on the
Connect
button to establish connectivity, and bring up the
Connecting
screen.
•
Upon a successful connection, the
Connecting
screen shows the Connection succeeded
message, as shown in Figure 51.
