Vortex86DX-MSJK Windows Embedded CE 6.0 R3 Jump Start Rev 2.2
Page 92 of 144
To use this remote tool, with the CE 6.0 OS runtime image, built with KITL enabled, downloaded to
the target device, work through the following steps to launch the Remote System Information tool:
•
From the VS2005 IDE, select Target | Remote Tools | System Information to bring up the
Select a Windows CE Device screen.
•
From the Select a Windows CE Device screen, click on the Default Device selection follow by
the OK button to establish connectivity to the target device.
After the remote connection is established, the following Windows CE Remote System Information
screen will appear, as shown in Figure 98.
Fig. 98 -
Remote Registry Editor
