Vortex86DX-MSJK Windows Embedded CE 6.0 R3 Jump Start Rev 2.2
Page 48 of 144
Fig. 33 -
Windows Embedded CE 6.0 desktop from the target device
Deploy CE 6.0 OS Runtime Image to Target Device
In the previous step, when the CE 6.0 image is downloaded and launched on the target device, the
image is placed directly to the target device’s memory (RAM) and is not saved to the target device’s
local storage. After going through power reset, the downloaded image will be lost. To deploy a CE
6.0 OS runtime image to the target device’s local storage, the OS runtime image file, NK.bin, needs
to be copied to the local storage and configure with an appropriate bootloader.
The
NK.bin
OS runtime image file, in release mode, is generated in the following directory:
C:\WINCE600\OSDesigns\MyWinCE\MyWinCE\RelDir\ICOP_VDX6326_60B_x86_Release
Note:
Release mode image built with KITL enabled and debug image is not intended for deployment to the
target device’s local storage.
There are multiple methods to deploy the NK.bin OS runtime image file to the target device’s local
storage.
Refer to appendix H for more information about deploying a CE 6.0 OS runtime image to the target
device’s local storage using DiskPrep, a Windows CE power toy.
The DiskPrep power toy is available for download from the following URL:
http://code.msdn.microsoft.com/DiskPrep
