Vortex86DX-MSJK Windows Embedded CE 6.0 R3 Jump Start Rev 2.2
Page 49 of 144
Part 8 – Software Development Kit (SDK)
In this section, we will work through the steps to create and configure an SDK from the MyWinCE OS
design project. An SDK is needed to support application development for the target device.
Create and Configure CE 6.0 SDK
With MyWinCE OS design project active, select
Project | Add New SDK
from the VS2005 IDE to bring
up the SDK Property Pages screen, as shown in Figure 34.
Fig. 34 -
New SDK Property Page
•
Enter
MyWinCE600_SDK
as the name for the SDK
•
Fill in the company name and company website information.
•
Click on the
Install
node from the left pane, and enter
MyWinCE600_SDK.msi
as the file
name on the right, as shown in Figure 35.
Fig. 35 -
SDK Property Page
•
On the left pane, click on
Development Languages
node to bring up the development
languages configuration, and enable support for both the Native and Managed
development, as shown in Figure 36.
