Vortex86DX-MSJK Windows Embedded CE 6.0 R3 Jump Start Rev 2.2
Page 30 of 144
•
Hive-based registry support
Note:
The Hive-based registry component is needed to save registry settings to non volatile flash storage
between power reset.
•
R6040 Ethernet driver
Note:
The VDX-6326 SBC has 3 10/100 Mbps Ethernet ports onboard. One of the Ethernet port uses the
R6040 controller which is built-in to the Vortex86DX SoC. The other two Ethernet ports use the
Realtek-8100 controller, which is supported by the Realtek-8139 Ethernet driver.
For this exercise, we only need one Ethernet interface.
•
256MB RAM
Note:
The VDX-6326 SBC is available with 256MB or 512MB of system memory. This component set the
IMGRAM256 environment variable and configure the OS runtime image to use the 256MB of
available system memory.
The VDX-6326 SBC for the Vortex86DX-MSJK jump start kit is built with 256MB of system memory.
•
1
st
Serial Port
Note:
This component set the BSP_SERIAL environment variable to include serial port driver to the OS
runtime to support COM1, the first serial port. By default, the VDX-6326 SBC’s 1
st
serial port is
configured as follow:
-
COM1: IRQ-4, 3F8h
•
2
nd
Serial Port
Note:
This component set the BSP_SERIAL2 environment variable to include serial port driver to the OS
runtime to support COM2, the second serial port. By default, the VDX-6326 SBC’s 2nd serial port is
configured as follow:
-
COM2: IRQ-3, 2F8h
•
3
rd
Serial Port
Note:
This component set the BSP_SERIAL3 environment variable to include serial port driver to the OS
runtime to support COM3, the third serial port. By default, the VDX-6326 SBC’s 3
rd
serial port is
configured as follow:
-
COM3: IRQ-10, 3E8h
•
4
th
Serial Port
Note:
This component set the BSP_SERIAL4 environment variable to include serial port driver to the OS
runtime to support COM4, the fourth serial port. By default, the VDX-6326 SBC’s 4
th
serial port is
configured as follow:
-
COM4: IRQ-11, 2E8h
•
SPI Flash driver
Note:
The SPI Flash driver supports the 4MB SPI flash built-in to the VDX-6326 SBC.
•
USB 2.0 Controller driver
Note:
This component set the SYSGEN_USB, BSP_USB_OHCI, BSP_USB_UHCI and BSP_USB_EHCI
environment variables to include the USB 2.0 driver.
