Vortex86DX-MSJK Windows Embedded CE 6.0 R3 Jump Start Rev 2.2
Page 20 of 144
Note:
It’s strongly recommended to install all software to the default installation directory. Some of the 3
rd
party components used for the exercises in this guide assume all software components are installed to
the default directory. When the software components are installed to a different directory, these 3
rd
party components may not function as expected.
Windows Embedded CE 6.0 SP1 Installation
After installing the CE 6.0 software, install the CE 6.0 SP1 update. Depending on the version of
CE 6.0 CD or DVD being used to install the software, the CE 6.0 SP1 update may be provided as
part of the CD or DVD. Otherwise, download and install CE 6.0 SP1 from the following URL:
http://www.microsoft.com/downloads/details.aspx?FamilyID=bf0dc0e3-8575-4860-a8e3-
290adf242678&DisplayLang=en
Windows Embedded CE 6.0 R2 Installation
After installing the CE 6.0 SP1, install the CE 6.0 R2 update. Depending on the version of CE 6.0
CD or DVD being used to install the software, the CE 6.0 R2 update may be provided as part of
the CD or DVD. Otherwise, download and install CE 6.0 R2 from the following URL:
http://www.microsoft.com/downloads/details.aspx?FamilyID=f41fc7c1-f0f4-4fd6-9366-
b61e0ab59565&DisplayLang=en
Windows Embedded CE 6.0 R3 Installation
After installing the CE 6.0 R2, install the CE 6.0 R3 update. Depending on the version of CE 6.0
CD or DVD being used to install the software, the CE 6.0 R3 update may be provided as part of
the CD or DVD. Otherwise, download and install CE 6.0 R3 from the following URL:
http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=bc247d88-ddb6-4d4a-a595-
8eee3556fe46
Board-Support-Package Installation
VS2005, CE 6.0, CE 6.0 SP1, CE 6.0 R2 and CE 6.0 R3 must be installed prior to installing the Board-
Support-Package (BSP). The ICOP_VDX6326_60B BSP is provided on the jump start CD, in the
\Software
folder.
\Software\ICOP_VDX6326_60B_BSP.msi
After installation, this BSP shows up on the CE 6.0 Platform Builder component catalog as
“ICOP_VDX6326_60B: x86” under the “\Third Party\BSP” folder.
Note:
x86 CPU support for CE 6.0 PLATFORM BUILDER is needed in order to use ICOP_VDX6326_60B BSP to create
OS design and build CE 6.0 image for the VDX-6326 SBC.
SDK Installation
VS2005, CE 6.0, CE 6.0 SP1 and CE 6.0 R3 must be installed prior to installing the SDK. The CE 6.0
SDK needed to support application development exercises in this guide,
MyWinCE600_SDK.msi
, is
provided on the jump start CD, in the
\Software
folder.
\Software\MyWinCE600_SDK.msi
