Vortex86DX-MSJK Windows Embedded CE 6.0 R3 Jump Start Rev 2.2
Page 19 of 144
If you have the full retail or evaluation version of Windows Embedded CE 6.0 R3, The CE 6.0 R3
update is provided on one of the DISC. Otherwise, download from the following URL:
http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=bc247d88-ddb6-4d4a-a595-
8eee3556fe46
•
ICOP_VDX6326_60B_BSP.msi
This BSP is provided on the jump start kit CD, in the
\Software
folder.
•
MyWinCE600_SDK.msi
This SDK is provided on the jump start kit CD, in the
\Software
folder.
•
CoreCon_v200_x86_WinCE600.msi
This CoreCon component is provided on the jump start kit CD, in the
\Software
folder.
•
AutoLaunch_v200_x86_WinCE600.msi
This AutoLaunch component is provided on the jump start kit CD, in the
\Software
folder.
•
RegFlushApp_v100_x86_WinCE600.msi
This RegFlushApp component is provided in the jump start kit CD, in the
\Software
folder.
Windows E
mb
edded CE 6.0
Installation
Since the CE 6.0 development tool, Platform Builder, is a plug-in to the VS2005 IDE
, the
VS2005 development tool must be installed to the develop workstation prior to installing the CE 6.0
software packages. While the CE 6.0 installation does not require VS2005 SP1 to be installed, it’s
required to install SDK generated from the CE 6.0 OS design. The SDK is needed to support VS2005
and VS2008 application development. For Windows Vista workstation, VS2005 SP1 Update for Vista
is also needed.
By default, the CE 6.0 installation program only selects and includes support for the ARMV4I
processor during installation. The VDX-6326 SBC is built with an x86 processor. Support for the x86
processor must be selected and included as part of the installation in order to work through the
exercises in this guide.
When installing the CE 6.0 software, during the supported processor selection step, include support
for the x86 processor, as shown in Figure 5.
Fig. 5 -
Windows Embedded CE 6.0 setup
