background image

3-BUTTON REMOTE CONTROLS

MODELS 139.18802 AND 139.18803

To prevent possible SERIOUS INJURY or 
DEATH from a moving gate or garage door:
•   ALWAYS keep remote controls out of 

reach of children. NEVER permit children 
to operate or play with remote controls.

•   Activate gate or door ONLY when it can be 

seen clearly, is properly adjusted and there 
are no obstructions to door travel.

•   ALWAYS keep gate or garage door in sight 

until completely closed. NEVER permit 
anyone to cross path of moving gate or 
door.

For use with Craftsman 315 MHz or 390 MHz garage door openers manufactured after 
January 1, 1993. The garage door opener activates when the programmed button on the 
remote control is pressed. The remote control can activate up to three garage door openers.

Make sure the garage door opener has a working light bulb because it is a programming 
indicator.

LED

LED

Locate the Program button on the 
remote control.

Locate the Learn 
button on the garage 
door opener.

NOTE:

 Your garage door 

opener may look different.

OR

OR

Learn 
LED

Learn 
LED

Learn 
LED

Green
or
Red/Orange

Purple

Yellow

Program Button

Program Button

4

Press and release the Learn 
button on the garage door 
opener.

3

To exit programming mode, 
press any remote control 
button 

except

 the button 

that was just programmed.

Install the visor clip.

7

Press the remote control button 
programmed in step 2 until the 
garage door opener lights flash 
or two clicks are heard. 

To test, press the programmed 
button on the remote control...

1

Within 30 seconds...

The Learn LED will light.

5

6

Press and hold the program button 
the remote control until the LED on 
the front of the remote control 
turns on.

Learn
Button

Click

Click

The garage door 
opener will activate.

2

Press and release the remote control button you wish to use the 
number of times that corresponds with the garage door opener type:

# of Presses

Garage Door Opener Type

1
2
3
4

S 2.0

TM

 (Yellow Learn Button)

315 MHz S

®

 (Purple Learn Button)

390 MHz S

®

 (Red/Orange Learn Button)

390 MHz Billion Code (Green Learn Button)

MODEL 139.18802

PREPARE

PROGRAM THE REMOTE CONTROL (139.18802)

MODEL 139.18803

139.18802

139.18803

Summary of Contents for 139.18802

Page 1: ...our garage door opener may look different OR OR Learn LED Learn LED Learn LED Green or Red Orange Purple Yellow Program Button Program Button 4 Press and release the Learn button on the garage door opener 3 To exit programming mode press any remote control button except the button that was just programmed Install the visor clip 7 Press the remote control button programmed in step 2 until the garag...

Page 2: ...pt for changing the code setting or replacing the battery THERE ARE NO OTHER USER SERVICEABLE PARTS Tested to Comply with FCC Standards for Home or office use Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation BATTERY The LED on your r...

Page 3: ... 1 2 3 4 Security 2 0TM Bouton Learn jaune 315 MHz Security Bouton Learn voilet 390 MHz Security Bouton Learn rouge ou orange 390 MHz Billion Code Bouton Learn vert 2 Enfoncer et relâcher le bouton de la télécommande le nombre de fois correspondant au type d ouvre porte de garage MODÈLE 139 18802 PRÉPARATION PROGRAMMATION DE LA TÉLÉCOMMANDE 139 18802 MODÈLE 139 18803 139 18802 139 18803 Pour une u...

Page 4: ...e soleil modèle 139 18802 UNIQUEMENT 29B137 1 2 3 Ouvrir le boîtier à l aide de la lame d un tournevis Ouvrir le boîtier d abord au milieu 1 puis de chaque côté 2 et 3 à l aide de la pince de pare soleil 139 18802 PROGRAMMATION DE LA TÉLÉCOMMANDE 139 18803 Pour le service prière de composer notre numéro sans frias 1 800 LE FOYERMD 1 800 533 6937 139 18803 Pour prévenir d éventuelles BLESSURES GRAV...

Reviews: