Icom IC-2710H, Instruction Manual, Page: 67 / 88

13
PAGER AND CODE SQUELCH
62
Ä
Push [BAND] to select the desired band, if nec-
essary.
Å
Set the operating frequency.
Ç
Push [FUNC] then [
➄
C SQL] to turn the code
squelch ON.
• “C” appears in place of the 100 MHz digit.
• An optional tone squelch can be used together with
the code squelch. (p. 54)
É
Select the desired code channel:
➥
Push [
F
SET].
➥
Push [
Y
] or [
Z
] to select the code channel.
➥
Push [
E
CLR] to exit the setting display.
Ñ
Operate the transceiver in the normal way
(push [PTT] to transmit; release [PTT] to re-
ceive).
• Prior to voice transmission, a 3-digit transmit code
is sent each time [PTT] is pushed in order to open
the receiving station’s code squelch.
Ö
To cancel the code squelch push [
E
CLR].
• Pushing [FUNC] then [
F
D-OFF] also cancels the
code squelch.
■
Code squelch operation
➀
Push the desired band’s tuning dial.
➁
Set the operating frequency.
➂
Push [DTMF] 3 times to turn the code squelch ON.
• “C” appears in place of the 100 MHz digit as shown below.
• An optional tone squelch can be used together with the code
squelch, although the pocket beep cannot be used. (p. 54)
➃
Select the desired code channel:
➥
Push [SET].
➥
Rotate the selected band’s tuning dial to select the code chan-
nel.
➥
Push the selected band’s tuning dial to exit the setting display.
➄
Operate the transceiver in the normal way (push [PTT] to
transmit; release [PTT] to receive).
• Prior to voice transmission, a 3-digit transmit code is sent each
time [PTT] is pushed in order to open the receiving station’s code
squelch.
➅
To cancel the code squelch, push [DTMF] once (or 2 times
for the U.S.A. version).
• The display shows the operating frequency.
“C” appears in place
of the 100 MHz digit.
C SQL
5
CLR
A
IC-2710H.qxd 02.2.8 16:55 Page 62 (1,1)