Icom IC-2710H, Instruction Manual, Page: 40 / 88

6
MEMORY OPERATION
35
■
Transferring memory
contents
This function transfers a memory channel’s contents into a VFO
(or another memory/call channel). This is useful when search-
ing for signals around a memory channel frequency and for re-
calling the offset frequency, subaudible tone frequency, etc.
➀
Push the desired band’s tuning dial.
➁
Select the memory channel to be transferred:
➥
Select memory mode by pushing the selected band’s [M/CALL]
once or twice (“
!
” appears).
➥
Rotate the selected band’s tuning dial to select the memory
channel.
➂
Push [S.MW] momentarily, then rotate the tuning dial to se-
lect another memory channel to transfer.
• To transfer to the VFO, push and hold [
(S.MW)
MW] instead of
pushing momentarily.
➃
Push and hold [
(S.MW)
MW] to transfer when a momentary
push was used in the previous step.
DUP –
T
DUP –
T
S.MW MW
Push
+
for 1 sec.
MW
FUNC
A
CLR
Ä
Push [BAND] to select the desired band, if nec-
essary.
Å
Select the memory channel to be transferred:
➥
Push [MR] to select memory mode.
➥
Push [
Y
] or [
Z
] to select the memory channel; or
push [
G
ENT] then push the desired memory chan-
nel number (2 digits) to select the memory channel
directly.
Ç
Push [FUNC] then [
E
MW] momentarily, then
push [
Y
] or [
Z
] to select another memory chan-
nel to transfer.
• To transfer to the VFO, push [FUNC] then push and
hold [
E
MW]
instead of pushing momentarily.
É
Push [FUNC] then [
E
MW] for 1 sec. to transfer
when a momentary push was used in the pre-
vious step.
MW
IC-2710H.qxd 02.2.8 16:55 Page 35 (1,1)