Icom IC-2710H, Instruction Manual, Page: 45 / 88

8
SCRATCH PAD MEMORY
40
➀
Push the desired band’s tuning dial.
➁
Select the call channel by pushing the selected band’s
[M/CALL] once or twice.
• A large “C” appears.
➂
Rotate the selected band’s tuning dial to select the desired
scratch pad memory.
• One of “L1”–“L3” appears.
➃
Push [
(S.MW)
MW] momentarily.
• “ ” flashes to indicate VFO as the transferring channel.
➄
Rotate the tuning dial to select the desired memory chan-
nel if required.
➅
Push and hold [
(S.MW)
MW] to transfer.
Ä
Push [BAND] to select the desired band, if nec-
essary.
Å
Push [
(MR)
CALL] for 1 sec. to select the call
channel.
Ç
Push [
Z
] one or more times to select the de-
sired scratch pad memory.
É
Push [FUNC] then [
E
MW] momentarily.
• “ ” flashes to indicate VFO as the transferring
channel.
Ñ
Push [
Y
] or [
Z
] to select the desired memory
channel if required.
Ö
Push [FUNC] then [
E
MW] for 1 sec. to transfer.
Ä
Push [BAND] to select the desired band, if nec-
essary.
Å
Push and hold [
(MR)
CALL] to select the call
channel.
Ç
Push [
Z
] one or more times to select a duplex
scratch pad memory.
• Once entering a scratch pad memory, [
Y
] can also
be used for selection.
É
Push [MR] or [VFO] to exit the scratch pad
memory.
■
Transferring scratch pad
memory contents
Transferring scratch pad memory contents to the VFO is done
similarly to transferring regular memory/call channel contents.
CALL
Push for 1 sec.
then
S.MW MW
MW
FUNC
A
CLR
MW
IC-2710H.qxd 02.2.8 16:55 Page 40 (1,1)