Icom IC-2710H Instruction Manual Download Page 58

Page: 58 / 88

POCKET BEEP AND TONE SQUELCH

Push [BAND] to select the desired band, if nec-
essary.

Set the operating frequency.

Program the subaudible tone frequency in set
mode.

• See p. 29 for programming details.

Push [FUNC] then [

➇

T SQL

] to turn the

pocket beep ON.

• Turn OFF the pager or code squelch to activate the

pocket beep. (pgs. 59, 62) The pocket beep cannot
be used with the pager or code squelch.

When a signal with the correct tone is received,
the transceiver emits beep tones for 30 sec.
and flashes “

.”

Push [PTT] to answer or push [

CLR] to stop

the beeps and flashing.

• Tone squelch is automatically selected.
• Pushing [FUNC] then [

➈

TSQL] also selects the tone

squelch.

To cancel the function, push [FUNC] then
[

T-OFF].

Waiting for a call from a specific station

A subaudible tone matched with the stations frequency is
necessary. Use the tone squelch on the next page or a sub-
audible tone encoder (p. 29).

■

Pocket beep operation

This function uses subaudible tones for calling and can be
used as a “common pager” to inform you that someone has
called while you were away from the transceiver.

To operate the pocket beep function, an optional UT-104 is
necessary. See p. 65 for installation details.

Waiting for a call from a specific station

➀

Push the desired band’s tuning dial.

➁

Set the operating frequency.

➂

Program the subaudible tone frequency in set mode.

• See p. 29 for programming details.

➃

Push [

(DTMF)

T] for 1 sec., 2 times to indicate “T SQL

”

in the function display.

• Turn OFF the pager or code squelch to activate the pocket beep.

(pgs. 59, 62) The pocket beep cannot be used in combination
with the pager or code squelch.

➄

When a signal with the correct tone is received, the trans-
ceiver emits beep tones and flashes “

”.

• Beep tones sound for 30 sec. To stop the beeps manually, push

the tuning dial (or any key).

• “

” flashes coninuously until step

➅

➆

• When receiving another call while “

” is flashing, no beeps sound.

➅

Push [PTT] to answer.

• Tone squelch is automatically selected when transmitting.

➆

Push [

(DTMF)

T] for 1 sec. once or twice to cancel the function.

T SQL

T-OFF

optional UT-104

IC-2710H.qxd 02.2.8 16:55 Page 53 (1,1)

Summary of Contents for IC-2710H

























































































Search results

Summary of Contents for IC-2710H

Reviews:

Icom IC-2710H, Instruction Manual, Page: 58 / 88

Search results

Summary of Contents for IC-2710H

Reviews: