manualshive.com logo in svg

Icom IC-2710H, Instruction Manual, Page: 59 / 88

Share
Download
Icom IC-2710H Instruction Manual Download Page 59

12

POCKET BEEP AND TONE SQUELCH

54

■

Tone squelch operation

The tone squelch opens only when receiving a signal with the
same pre-programmed subaudible tone. This function can be
activated on both bands with separate tone frequencies si-
multaneously. To operate the tone squelch function, an op-
tional UT-104 is necessary.

➀

Push the desired band’s tuning dial.

➁

Set the operating frequency.

➂

Program the subaudible tone frequency in set mode.

• See p. 29 for programming details.

➃

Push [

(DTMF)

T] for 1 sec., several times until “T SQL” ap-

pears in the function display.

• The pager or code squelch can be used together with the tone

squelch. (p. 62)

➄

When the received signal includes the correct tone, the
squelch opens and the signal can be heard.

• When the received signal includes an incorrect tone, the squelch

does not open. However, the S/RF indicator shows the received
signal strength.

• To open the accessed band’s squelch manually, push the ac-

cessed band’s [MONI].

➅

Operate the transceiver in the normal way (push [PTT] to
transmit; release [PTT] to receive).

➆

To cancel the tone squelch, push [

(DTMF)

T] for 1 sec.

• “T SQL” disappears from the function display.

Ä

Push [BAND] to select the desired band, if nec-
essary.

Å

Set the operating frequency.

Ç

Program the subaudible tone frequency in set
mode.

• See p. 29 for programming details.

É

Push [FUNC] then [

➈

T SQL] to turn the tone

squelch ON.

• The pager or code squelch can be used with the

tone squelch. (p. 62)

Ñ

When the received signal includes the correct
tone, the squelch opens and the signal can be
heard.

• When the received signal includes and incorrect

tone, the squelch does not open. However, the S/RF
indicator shows the received signal strength.

• To open the accessed band’s squelch manually,

push [

➀

MONI].

Ö

Operate the transceiver in the normal way
(push [PTT] to transmit; release [PTT] to re-
ceive).

Ü

To cancel the tone squelch, push [FUNC] then
[

G

T-OFF].

T SQL

9

T-OFF

C

IC-2710H.qxd  02.2.8 16:55  Page 54 (1,1)

Summary of Contents for IC-2710H

























































































Reviews:

No comments