IBM Multiprise 3000 S/390, Installation Manual

Page: 166 / 175

| 8 Removing Power
| 1. Set the CPC CB to the OFF position (refer
| to page 4-5).
| 2. At the front of frame "A" set the red Unit
| Emergency Only Switch to the Off position
| (refer to page 4-5).
| 3. Have the customer set the system(s)
| breaker to OFF. (refer to page 4-1).
| 4. Disconnect the AC Line Cord from building
| power. (refer to page 4-1).
| 9 Hardware Management Console(s)
| 1. Disconnect building power from the
| Hardware Management Console or
| Standalone Support Element (refer to page
| 3-10).
| 2. Disconnect building power from the display
| (refer to page 3-10).
| 3. Disconnect building power from modem if
| modem is attached (refer to page 3-5).
| 4. Disconnect Lan extension cable (Part
| 6339134) from the LAN cable (Part
| 6339098) at the rear of the Hardware
| Management Console (refer to page 3-8).
| 5. Disconnect the LAN cable (Part 60G1066)
| from the rear of the Hardware Management
| Console (refer to page 3-8).
| 6. Disconnect the coaxial cable from the (IBM
| 3270 Connection) if installed (refer to page
| 3-8).
| 7. Disconnect the communication adapter
| cable from the console and modem if
| modem is attached (refer to page 3-5).
| 8. Disconnect keyboard from console (refer to
| page 3-3).
| 9. Disconnect mouse from console (refer to
| page 3-4).
| 10. Disconnect display from console (refer to
| page 3-4).
| 11. Disconnect printer if attached from console
| (refer to page 3-9).
| 12. Disconnect Ethernet adapter cable if
| installed (refer to page 3-9).
| 13. Package all parts to be shipped.
A-6
Installing the System