IBM Multiprise 3000 S/390, Installation Manual

Page: 97 / 175

Changing Internal Code (Hardware Management Console)
This procedure allows you to install licensed internal code changes on the Hardware Management
Console that were retrieved.
1 Starting the operation
1. Open Console Actions from the Views
area
2. Open Change Console Internal Code
from the Console Actions Work Area
2 Installing the changes
The Change Console Internal Code panel displays.
1. Select Install and activate changes that
were retrieved from the menu.
2. Select OK .
Note: Only operations that are valid are
selectable.
Note: Verify that Enabled appears in the change
management service field. If not call your
IBM support center for assistance.
3 Selecting the changes
The Select Internal Code Changes panel displays.
1. Select All internal code changes from the
menu.
2. Select OK .
4 Activating the changes
The Confirm the Action panel displays.
1. Select Install and activate
Chapter 6. Completing the Installation
6-19