2 Completing the operation
Read the notes that follow before proceeding.
Note:
Follow the instructions on the panels to
complete the operation.
Note:
If no errors are detected, the following will
happen.
A message may display stating “the internal
code changes were installed and activated
as requested.” Select
OK
to close the
window. Press
Esc
until the Setup
Installation Options panel is displayed.
Select
End set up
. If no message displays
double click on
System Information
from
the
Change Management
area to see that
the code changes were installed..
OR
Your Support Element may re-initialize. If
this happens, wait until the Hardware
Management Console Workplace panel
displays and The Support Element has
re-initialized. When complete, go to
“Establishing a CPC Console Connection”
on page 6-26.
Note:
If errors are detected during this procedure,
the Hardware Messages icon will be
flashing. Correct the problem (see
The
Hardware Messages icon
then retry this procedure.
Chapter 6. Completing the Installation
6-25
Summary of Contents for Multiprise 3000 S/390
