IBM BladeCenter HS12 Type 1916, Service Manual

Page: 101 / 204

v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v
See Chapter 4, “Parts listing, Types 8014, 8028 and 1916,” on page 25 to determine which components are CRUs
and which components are FRUs.
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Error code Description Action
184 Bad power-on password.
1.
Run the Configuration/Setup Utility program
(“Using the Configuration/Setup Utility
program” on page 15), select
Load Default
Settings and save the settings.
2. Reseat the battery - See “Removing the battery”
on page 57 and “Installing the battery” on page
58.
3. Replace the following components one at a time,
in the order shown, restarting the blade server
each time:
a.
Battery - See “Removing the battery” on page
57 and “Installing the battery” on page 58.
b. (Trained service technician only)
System-board assembly - See “Removing the
system-board assembly” on page 65 and
“Installing the system-board assembly” on
page 66.
188 Bad EEPROM CRC #2 (Trained service technician only) Replace the
system-board assembly - See “Removing the
system-board assembly” on page 65 and “Installing
the system-board assembly” on page 66.
189 Three attempts to enter the incorrect
password. Restart the blade server, run the
Configuration/Setup Utility program (“Using the
Configuration/Setup Utility program” on page 15),
and change the power-on password (“Using
passwords” on page 18).
Chapter 6. Diagnostics
89