IBM BladeCenter HS12 Type 1916, Service Manual

Page: 116 / 204

v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v
See Chapter 4, “Parts listing, Types 8014, 8028 and 1916,” on page 25 to determine which components are CRUs
and which components are FRUs.
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Error code Description Action
00150100 Multi-bit error occurred: forcing NMI
DIMM=
xx DIMM= yy (could not isolate)
1.
Reseat following components one at a time, in
the order shown, restarting the blade server each
time:
a. DIMMs xx and yy - .
b. Optional expansion unit (if one is installed) -
See “Removing an optional expansion unit”
on page 37 and “Installing an optional
expansion unit” on page 38.
2.
Replace the following components, one at a time,
in the order shown, restarting the blade server
each time:
a.
DIMMs xx and yy -
b.
Optional expansion unit (if one is installed) -
See “Removing an optional expansion unit”
on page 37 and “Installing an optional
expansion unit” on page 38.
c. (Trained service technician only) System-board
assembly - See “Removing the system-board
assembly” on page 65 and “Installing the
system-board assembly” on page 66.
00150200 SERR: Addr or Spec. Cyc. DPE Slot= xx
Vendor ID= xxxx Device ID= xxxx
Status= xxxx
1.
If an optional expansion unit is installed, reseat it
- See “Removing an optional expansion unit” on
page 37 and “Installing an optional expansion
unit” on page 38.
2. Reseat the I/O expansion card in slot xx ; then,
restart the blade server.
3. Replace the following components, one at a time,
in the order shown, restarting the blade server
each time:
a. I/O expansion card in slot xx -
b. Optional expansion unit (if one is installed) -
See “Removing an optional expansion unit”
on page 37 and “Installing an optional
expansion unit” on page 38.
c.
(Trained service technician only) System-board
assembly - See “Removing the system-board
assembly” on page 65 and “Installing the
system-board assembly” on page 66.
104
BladeCenter HS12 Type 8014, 8028 or 1916: Problem Determination and Service Guide