IBM 3745 Series, Hardware Maintenance Reference

Page: 614 / 712

TRSS BER
Table 11-69 (Page 2 of 3). TRSS BER Type 15 Summary
BER
ID Abend
Code
(NCP) Event Description Recovery
or PGM
Action ALARM/
ALERT
9B 0 Interrupt from disconnected TRM
Ÿ
Level 1 interrupt presented to NCP/PEP while the
TRM is disconnected (X'01' bit 5 ON)
Ÿ X'7E' bit 0.2 or 0.6 ON
NO
9B 0 Interrupt from disconnected TRM (limit threshold) TRM down NO
9B XXXX Interrupt from disconnected TRM NCP re-IPL NO
9C 0 Adapter PIO error on broadcast "get line ID" IOH
command Adapter was the answering one at failure
time. NO NO
9C 0 Adapter PIO error on broadcast "get line ID" IOH
command Adapter was the answering one at failure
time. (threshold) Adapter
down 83
83
9E 0 Get error status command error, after PIO (see type 15
ID 9A and 9c) NCP re-IPL 83
A3 0 Invalid level 2 interrupt TIC down 80
A4 0 DMA or interrupt vector error due to TIC interrupt level
2
Ÿ
TRM status bit 0 ON
Ÿ TRM status bits 4, 5 not '000'
TIC retry NO
A4 0 DMA or interrupt vector error due to TIC (limit
threshold) TIC down 80
A5 0 DMA or interrupt vector error due to TRM Interrupt
level 2
Ÿ TRM status bit 0 ON
Ÿ TRM status bit 6 ON
TIC retry NO
A5 0 DMA or interrupt vector error due to TRM (limit
threshold) TRM down 83
A7 0 PIO-MMIO error interrupt level 2
Ÿ TRM status bit 0 ON
Ÿ TRM status bits 1, 2, 3 neither '000' nor '001'
TIC retry NO
A7 0 PIO-MMIO error (limit threshold) TIC down 80
A8 0 PIO-MMIO error (last TIC)
Ÿ TRM status bit 0 ON
Ÿ TRM status bits 1, 2, 3 ='001'
TRM retry NO
A8 0 PIO-MMIO error (last TIC)
Ÿ TRM status bit 0 ON
Ÿ TRM status bits 1, 2, 3 ='001'
TRM down 83
AC 0 TIC adapter check interrupt level 2
Ÿ TRM status bit 0 OFF
Ÿ TRM status bit 3 ON
TIC down 80
AF 0 TIC down at open time
Ÿ Interrupt level 2
Ÿ SSB open completion bit 6 ON
TIC down 85
B2 0 TIC/TRM check at initialization time TIC retry NO
B2 0 TIC/TRM check at initialization time (limit threshold) TIC down (2)
11-202
IBM 3745 Models 130, 150, 160, 170, and 17A: Hardware Maintenance Reference