IBM 3745 Series, Hardware Maintenance Reference

Page: 599 / 712

TSS/HPTSS BER
TSS/HPTSS BER Type 11 - Field Description
Table 11-62 (Page 1 of 2). TSS/HPTSS BER Type 11 Field Description
Field
Name Meaning Refer to
ADNO CS number (decimal) in error description field. This CS
number is derived from:
Ÿ
field TA for PIO operation
– for CS error reported at level 2
– for CA error reported at level 3.
Ÿ
field X75 for AIO operation.
Ÿ field CSPA for CS error reported at level 1.
If no n is specified (blank CS), problem isolation by
program was not possible.
LAS or
L-STAT LA adapter status
Ÿ
LA Error status type 1: CSP error status 1
Ÿ
LA Error status type 2: CSP error status 1
Ÿ
LA Error status type 3/H: CSP error status 1
Chapter 4
CSPA CSP address used by NCP/PEP (see CSn and LINEnn).
ETA TA field of IOH failure in level 1.
IDR Get line ID response. Chapter 4
F Indicator flag (indicates a byte expansion follows) (*)
SWA Unused
CR1 First command sent to scanner
CR2 Second command sent to scanner
LAR Lagging address register- Page 2-42
SPR LA shared pointer register X'3F' or X'6F'.
CSC Configuration status control flag (contains X'FFFF' for
PEP, BSC/SS and BNN lines).
CNT Repetition count (BER flooding). Number of times the
BER appeared.
SCF Secondary control field.
I First two bytes of instruction.
IAR IAR of interrupt level.
LCS Line control status. Chapter 4 and
page 5-31
LINEnn Line number (0 to 31) within the CS (in error description
line).
LNVT Line vector table. Chapter 4
LOST Lost record count (LRC). (*)
NW Network address (NCP) or CA number and ESC (PEP). (*)
IOB/LXB X'24' bytes of LXB (for SDLC lines) or IOB (for BSC/SS
lines) control blocks. This area is padded with X'FF' for
PEP. (*)
CCB X'40' bytes of data from the CCB control block.
Ÿ
If PEP, the fields are CCBL2 through CCBPOLL inclu-
sive.
Ÿ If PEP, the fields are CCBTROPT through CCBXPTR
inclusive.
(*)
AXB ACB
TRACE X'E' bytes of data from the AXB control block from
AXBFCTL through AXB+X'15' (ACB trace area).
For PEP, this area contains the CCB extension starting at
the PEP CCB + X'60'. (*)
AXB PSA X'11' bytes of data from the PSA trace area of the AXB
control block (AXBASSCF through AXBTROFF).
For PEP, this area contains the remaining portion of the
CCB extension padded with X'F'. (*)
SCB X'19' bytes of the SCB/CUB from SCBSSCF (CUBSSCF)
through SCBRTCNT (CUBRTCNT) inclusively. For
BSC/SS lines and for PEP, this area is padded with
X'FF's. (*)
Chapter 11. Error Logging
11-187