IBM 3745 Series Hardware Maintenance Reference Download Page 241

Page: 241 / 712

mmm Connection mode

DDS for connections to DDS network

LDM for limited distance connections

The DSU/CSU information is displayed as long as the operator keeps pressing the
ERASE key. Release the ERASE key to return to background display.

This operation is not data disruptive.

POR - Bring Up Information

Same as for LIC type 5; see page 4-76.

Keying Procedures

Same as for LIC type 5; see page 4-76.

Command Rejection

Same as for LIC type 5; see page 4-76.

Notes:

1. 'DTE ONLY' command rejection not available.
2. 'DDS LOOP ACTIVE' brings a command rejection.

Digital Test

See page 4-99.

Local Loop Back

This command prepares the DCE for a loop 3 test. See page 4-96.

Speed Change

Only for 19 200/9600 bps. See "Speed Settings", page 4-81.

Configuration

The PKD being connected to a given LIC type 6, the local DSU/CSU configuration
settings may be:

Scrolled and displayed

Updated.

Some fields are 'read only' (for example, machine level).

If vital fields have been modified, returning to background causes a self-test to take
place.

The table on page 4-85 shows the various configuration fields for local LIC type 6:

Buzzer Control

Same as for LIC type 5; see page 4-78.

Chapter 4. Transmission Subsystem (TSS)

4-89

Summary of Contents for 3745 Series









































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3745 Series

Reviews:

Related manuals for 3745 Series

Brands by name

Popular brands

IBM 3745 Series, Hardware Maintenance Reference

Search results

Summary of Contents for 3745 Series

Reviews:

Related manuals for 3745 Series

Brands by name

Popular brands