3.
Scheduled Server Status
Scheduled e-mails to provide server status: an e-mail and snapshot from the specified
camera are sent in this case. To have DVMS send the server status e-mails, fill in
Server Status menu:
a.
Check the Send Email checkbox to enable server status e-mail alerts
b.
Select the frequency of the automatic e-mails (1-24 hours) in the Send Email Every
x Hour(s) field
c.
Choose the Camera in the Include Image Of field. A snapshot from this camera
will be sent to the configured e-mail address.
d.
Enter the Email Title for the server status e-mail alerts (Optional)
Note
A first e-mail is sent after changes to this setting are saved and on the
i³Server startup. The i³Server will then send e-mails according to the set
schedule. In this example, every hour.
Configuring Email Setup
1.
Check the Enable Email checkbox
2.
Fill in the Send To section:
•
Enter the Email Address of the recipient. Optionally, multiple email addresses can
be entered. Separate multiple e-mail addresses by commas or semi-colons.
•
Enter the Email Transmission Delay. This option sets the delay time in minutes
that will pass after the sensor has been triggered before the transmission will start.
•
Enter the Threshold number. This value sets the number of event lines to be included
in the sent emails. Depending on the settings, numerous events can be registered
by the Server: detected motion, triggered sensor, activated control, video loss. Each
event can be reported individually by e-mail, however, this may flood the recipient
e-mail inbox; as a means to avoid this, multiple events (lines) can be sent in a single
e-mail.
68
i³Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
http://www.renderx.com/