Setup For All Cameras - Recording/Display Options
To set up recording/display options for all cameras, do the following:
1.
Choose the Screen Size for all cameras from 320x240 and 640x480 pixel. Screen Size
refers to the resolution of the received video image. The larger the screen size, the larger
the picture and the better the quality. Large screen size, however, will result in larger
file size and shorter recording period.
2.
Choose Quality (30%-100%). This value refers to the recording quality of the video. The
higher the percentage, the better the recording quality.
3.
Choose Transfer Quality (30%-100%). This value refers to the transfer quality of the
video recording that is viewed remotely through i³Remote. The lower the quality, the
worse the image appearance. The transmission speed, however, improves as the quality
decreases.
4.
Choose Color of Motion Area between Green and Red depending on personal esthet-
ical preferences. When the motion is detected on a specific camera, the triggered motion
detection zone will be highlighted on the main screen in the chosen color.
5.
Set the cameras to be displayed in the Full Screen mode on the main screen, when
motion is detected. One or more cameras can be configured. Separate camera numbers
with commas. In this example cameras 1 and 3 will be displayed in the Full Screen mode
if the motion is detected on them.
6.
Set the Dwell Time(Sec) (1 to 60 seconds) for the camera to stay in the full screen mode
after the motion detection. In the example above, the camera will remain in the Full
Screen mode for 5 seconds after the motion detection.
7.
Cick No Full Screen to reset the Full Screen When Motion option
8.
Set Camera Dwell Time (3 to 30 seconds). This is the Dwell time for the camera rotation
on the main screen. When the main screen is set to 4 cameras division and Rotate is
clicked, available cameras will rotate according to the dwell time specified. In this example,
the quad screen will display next 4 cameras every 5 seconds.
25
i³Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
http://www.renderx.com/