Active IP Device by Creating Strong Password
V20150706
1
This Quick Guide is going to introduce
how to Active IP Device by
Creating Strong Password
Before you can log into the device properly, you must create a password for the administrator user
“admin” of the device to activate it. Activation via Local GUI, Activation via Web Browser, Activation via
SADP, and Activation via Client Software are all supported. Follow the steps below to activate the device.
**
This function should be supported by the devices.
-
IP Cameras FW,
DS-2CD2xx2-I:
V5.3.0 Build150513
or Above
-
DVR FW,
DS-7200HWI-HK, DS-7300HWI-HK:
V3.1.4 Build150430
or Above
-
Turbo HD DVR FW,
DS-7200HQHI-HK, DS-7300HQHI-HK, DS-8100HQHI-HK:
V3.1.7 Build150515
or Above
-
NVR FW,
DS-7600NI-PHK:
V3.0.15 Build150528
or Above
DS-7700NI-PHK, DS-8000HFI-HK, DS-9000HWI-ST, DS-9600NI-ST:
V3.3.1 Build150423
or Above
Activation via Local GUI (Only Supported by Back-End Devices: DVR/NVR)
Steps:
1. Power on the DVR/NVR.
2. Create a password and input the password into the password field.
STRONG PASSWORD RECOMMENDED
– We highly recommend you create a strong password of your
own choosing (using a minimum of 8 characters, including upper case letters, lower case letters,
numbers, and special characters) in order to increase the security of your product. And we
recommend you reset your password regularly, especially in the high security system, resetting the
password monthly or weekly can better protect your product.
