3.
Configuring selected cameras to record based on motion that occured on associated
camera(s)
4.
Choosing the PTZ camera type
5.
Setting up an auto pan for selected cameras
Creating/Modifying Camera Settings
Camera Setup
To setup all connected cameras, do the following:
1.
Check the Enable checkbox for all connected cameras. The numbers correspond with
the physical BNC connectors in the back of the DVR.
Note
This feature is NOT available on i³Remote.
2.
Assign a Camera ID to any camera that can be controlled by a user - a P/T camera.
Cam IDs are assigned in order to distinguish between the different P/T cameras connec-
ted to the same parallel connection. Most Speed Domes have their Cam ID assigned
by dip-switches in the back of the camera. Fixed cameras do not have a Cam. ID.
Note
The BNC connector number does not have to match the Cam. ID number.
3.
Label the cameras for easy identification (e.g. Front Door)
4.
Enter the Sensor number to be associated with the specific camera. If the specific sensor
is triggered, that camera will begin recording (see Sensor Setup, Schedule Setup). In
the above example, if Sensor 2 is triggered, Camera 1 (Front Door) will start recording.
5.
In the Motion field associate the current camera with one or more cameras. When motion
is detected on an associated camera(s), the current camera will start recording. Motion
detection has to be configured and Schedule Setup has to be set to Motion recording
for the associated camera(s). (see Motion Setup, Schedule Setup). In the above example,
if the motion occurs on Camera 3 (Back Door), Camera 1 (Front Door) and 4 (Warehouse)
will begin recording.
6.
Check the P/T/Z (Pan-Tilt-Zoom) checkbox for cameras supporting the P/T feature
16
i³Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
http://www.renderx.com/