Dwell refers to the interval (in seconds) between the display of each camera.
Creating or Modifying External Monitor Settings
To set up an External Monitor do the following:
1.
Select the cameras to be shown in the sequence
2.
Specify the Dwell time for the sequence. (1-10 sec)
3.
Click Save
OR
1.
Check the Ext. Monitor Follows Main Screen checkbox to associate the external
monitor with the i³Server main screen.
2.
Click Save
If the Ext. Monitor Follows Main Screen option is unchecked, the External monitor will display
selected cameras one-by-one in the sequence. Each camera will be displayed for the length of
the Dwell time configured in the External Monitor setup. In this example, cameras 4, 9-12 will be
shown in a sequence on the external monitor. Each camera will be shown for 1 second.
If the Ext. Monitor Follows Main Screen option is checked, the configured camera sequence
will be ignored. The External monitor will display the camera currently in full screen mode in the
i³Server - chosen by the user or in response to detected motion. The external monitor will display
the last camera until the next camera is displayed in the Full Screen mode in the i³Server.
Related Topics: Camera Setup
Hardware Setup - The Preset Touring & Alarm/Preset
Overview
The Preset Touring & Alarm/Preset Setup in the Hardware Setup tab is for PTZ camera setup.
The presets for PTZ cameras are configured in the PTZ mode. Preset Touring specifies the time
that the PTZ cameras dwell on each configured preset, and the Alarm/Preset Setup associates
enabled sensors with configured presets for PTZ cameras. Each time a specific Sensor is triggered,
the assigned PTZ camera preset will be activated.
20
i³Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
http://www.renderx.com/
