The DVMS must be used with an Uninterruptible Power Supply (rated at a minimum
of 500 watts), with range protection. Failure to do so will void all warranties!
General
This product is the product of i³DVR International’s advanced technology and has passed extensive
reliability and compatibility tests. Copyright of this manual belongs to i³DVR International, and
may not be reprinted or reproduced without prior written permission. If the system needs to be
modyfied or repaired, a certified i³DVR Dealer/Installer must be contacted. Otherwise, the system
warranty will be voided. With any problems or questions regarding our product, contact the local
i³DVR Dealer/Installer. This product is certified for domestic and industrial use: CE certified for
Europe, and FCC certified for the USA.
Precautions
Most of i³DVR systems run on the Windows™ XP Professional operating system, while our Lite
models run on the Windows XP Home Edition. If a modem dial-up is needed, Windows 2000
Professional operating system is used. All i³ DVM systems come with pre-installed i³DVR Software
(i³Server, i³Remote, PACDM™). Please, do not install additional software on our system to
be used as a personal computer. Doing so will jeopardize the performance of the i³Server and
may even result in a system crash!
Please avoid these conditions when selecting a location for the DVMS:
•
Excessive heat, such as direct sunlight or heating appliances
•
Moisture, dust, and smoke
•
Magnetic fields or electrical waves
•
Below freezing temperatures
•
Obstruction to system ventilation hole
Before installing this system, please ensure that:
•
The power is switched off (**Do not plug the DVR unit in.)
•
There is enough room for the system and its connecting cables
•
The system is placed on an even surface
•
The system is not placed near any electronic equipment. (For example, a microwave,
radio, or any type of wireless equipment such as a telephone or cell phone)
•
A UPS is used with the i³DVR system
Unpacking
To unpack the DVMS, follow these steps:
1.
Place the box on a flat, clean surface.
2.
Remove the box by pulling and lifting the system up with both hands.
4
i³Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
http://www.renderx.com/
